How to remove Nhom10 ransomware and recover files

Complete tips to delete Nhom10 ransomware and decrypt data

Nhom10 ransomware is a piece of software categorized as ransomware. It operates by encrypting stored files and then demanding ransom payment for the decryption. Usually, ransomware renames the filenames of the encrypted files as they encrypt them. However, the Nhom10 virus does not change the filenames of the encrypted files. After the files encryption process is complete, it displays a pop- up window within with the ransom demanding note is written in Vietnamese.

As per the approximate translation, the ransom demanding message in the pop-up window informs the victims that their images, audios, videos, documents, presentations and etc have been encrypted. It states that a decryption key is must to recover these files and that private key is only the attackers have. They are asked to purchase the tool from them. To initiate this process, they are asked to establish communication to them via the provided email address. The ransom note concludes with a warning to the users that shutting down the device, removing the ransomware, using Windows Task Manager, attempting to crack the password without paying and opening the encrypted files will result into permanent data loss.

In most of the cases with ransomware infections, the decryption is not possible without the involvement of the crooks behind it. It might be when the ransomware is at its initial stage or has certain bugs/ flaws in them. Whatever be the case, it is highly not advised paying/ contacting the crooks. Despite paying, victims often do not receive the decryption tool. Hence, they suffer financial loss and their files remain encrypted. Removing Nhom10 ransomware from system will prevent further files encryption. Unfortunately, this will not restore already affected files. The sole solution for the files recovery is to use existing backups. If this option is not available, refer our data recovery section below for other data recovery options such as Volume Shadow Copies and instant data recovery tools with their step-by-step user guide for files recovery.

How did Nhom10 ransomware enter my system?

Ransomware and other malicious malware are often spread via various deceptive methods. The malware can often be presented as or bundled with regular software. Hence, they are usually downloaded/ installed unintentionally. The malware are commonly distributed through p2p networks, free file hosting sites and third party downloaders/ installers and other similar untrustworthy downloading channels. Illegal activation tools and fake software updaters are the prime examples of malware-spreading content. Cracking tools infect systems by supposedly activating licensed products. Fraudulent updaters cause system infection by exploiting bugs/ flaws of outdated software and/or by installing malicious malware instead of promised updates.

Scam campaigns are also used to spread malware. This term defines as mass-scale operation during which thousands of spam emails are designed and delivered. These letters are usually disguised as official, urgent, priority and similar. These emails have infectious files or links inside them. The infectious files can be in any formats including Microsoft Office and PDF documents, archives (ZIP, RAR, etc.), executables (.exe, .run, etc.), JavaScript, and so forth. When the files are executed, run, or otherwise opened – the infection process is initiated.

Text presented in Nhom10 ransomware‘s pop-up window:

Oops… Toàn bộ những file document, video, file ảnh, file nhạc

và các file khác của bạn đã bị mã hóa bằng một chương trình

Cần có khóa để giải mã, bạn có thể mua khóa này qua

email liên hệ này “[email protected]”

1. Không được tắt máy tính
2. Không được kill ransomware
3. Không được phép bật Task Manager
4. Không cố phá mật khẩu mà không trả tiền
5. Không cố mở các tệp được mã hóa

Sử dụng key

Thời gian còn lai: 00:47:02

How to prevent ransomware infection?

It is recommended to use only official websites and direct links for any software download. Furthermore, all software products should have to be activated/ updated using tools/ functions provided by legit developers. To avoid the system infection from spam emails, it is advised against opening any suspicious/ irrelevant emails –especially any presented links or attachments in them. It is crucial to have a reputable antivirus tool installed and updated – to ensure device integrity and personal safety. These programs should have to be for regular system scans to detect and delete any possible infections.

Antimalware Details And User Guide

Click Here For Windows

Click Here For Mac

Step 1: Remove Nhom10 ransomware through “Safe Mode with Networking”

Step 2: Delete Nhom10 ransomware using “System Restore”

Step 1: Remove Nhom10 ransomware through “Safe Mode with Networking”

For Windows XP and Windows 7 users: Boot the PC in “Safe Mode”. Click on “Start” option and continuously press on F8 during the start process until the “Windows Advanced Option” menu appears on the screen. Choose “Safe Mode with Networking” from the list.

Now, a windows homescreen appears on the desktop and work-station is now working on “Safe mode with networking”.

For Windows 8 Users: Go to the “Start Screen”. In the search results select settings, type “Advanced”. In the “General PC Settings” option, choose “Advanced startup” option. Again, click on the “Restart Now” option. The work-station boots to “Advanced Startup Option Menu”. Press on “Troubleshoot” and then “Advanced options” button.  In the “Advanced Option Screen”, press on “Startup Settings”. Again, click on “Restart” button. The work-station will now restart in to the “Startup Setting” screen. Next is to press F5 to boot in Safe Mode in Networking.

For Windows 10 Users: Press on Windows logo and on the “Power” icon. In the newly opened menu, choose “Restart” while continuously holding “Shift” button on the keyboard. In the new open “Choose an option” window, click on “Troubleshoot” and then on the “Advanced Options”. Select “Startup Settings” and press on “Restart”. In the next window, click on “F5” button on the key-board.

Step 2: Delete Nhom10 ransomware using “System Restore”

Log-in to the account infected with Nhom10 ransomware. Open the browser and download a legitimate anti-malware tool. Do a full System scanning. Remove all the malicious detected entries.

In case if you cannot start the PC in “Safe Mode with Networking”, Try using “System Restore”

• During the “Startup”, continuously press on F8 key until the “Advanced Option” menu appears. From the list, choose “Safe Mode with Command Prompt” and then press “Enter”

• In the new opened command prompt, enter “cd restore” and then press “Enter”.

• Type: rstrui.exe and Press “ENTER”

• Click “Next” on the new windows

• Choose any of the “Restore Points” and click on “Next”. (This step will restore the work-station to its earlier time and date prior to Nhom10 ransomware infiltration in the PC.

• In the newly opened windows, press on “Yes”.

Once your PC gets restored to its previous date and time, download the recommended anti-malware tool and perform a deep scanning in order to remove Nhom10 ransomware files if they left in the work-station.

In order to restore the each (separate) file by this ransomware, use “Windows Previous Version” feature. This method is effective when “System Restore Function” is enabled in the work-station.

Important Note: Some variants of Nhom10 ransomware delete the “Shadow Volume Copies” as well hence this feature may not work all the time and is applicable for selective computers only.

How to Restore Individual Encrypted File:

In order to restore a single file, right click on it and go to “Properties”. Select “Previous Version” tab. Select a “Restore Point” and click on “Restore” option.

In order to access the files encrypted by Nhom10 ransomware, you can also try using “Shadow Explorer”. In order to get more information on this application, press here.

Important: Data Encryption Ransomware are highly dangerous and it is always better that you take precautions to avoid its attack on your work-station. It is advised to use a powerful anti-malware tool in order to get protection in real-time. With this help of “SpyHunter”, “group policy objects” are implanted in the registries in order to block harmful infections like Nhom10 ransomware.

Also, In Windows 10, you get a very unique feature called “Fall Creators Update” that offer “Controlled Folder Access” feature in order to block any kind of encryption to the files. With the help of this feature, any files stored in the locations such as “Documents”, “Pictures”, “Music”, “Videos”, “Favorites” and “Desktop” folders are safe by default.

It is very important that you install this “Windows 10 Fall Creators Update” in your PC to protect your important files and data from ransomware encryption. The more information on how to get this update and add an additional protection form rnasomware attack has been discussed here.

How to Recover the Files Encrypted by Nhom10 ransomware?

Till now, you would have understood that what had happed to your personal files that got encrypted and how you can remove the scripts and payloads associated with Nhom10 ransomware in order to protect your personal files that has not been damaged or encrypted until now. In order to retrieve the locked files, the depth information related to “System Restore” and “Shadow Volume Copies” has already been discussed earlier. However, in case if you are still unable to access the encrypted files then you can try using a data recovery tool.

Use of Data Recovery Tool

This step is for all those victims who have already tries all the above mentioned process but didn’t find any solution. Also it is important that you are able to access the PC and can install any software. The data recovery tool works on the basis of System scanning and recovery algorithm. It searches the System partitions in order to locate the original files which were deleted, corrupted or damaged by the malware. Remember that you must not re-install the Windows OS otherwise the “previous” copies will get deleted permanently. You have to clean the work-station at first and remove Nhom10 ransomware infection. Leave the locked files as it is and follow the steps mentioned below.

Step1: Download the software in the work-station by clicking on the “Download” button below.

Step2: Execute the installer by clicking on downloaded files.

Step3: A license agreement page appears on the screen. Click on “Accept” to agree with its terms and use. Follow the on-screen instruction as mentioned and click on “Finish” button.

Step4: Once the installation gets completed, the program gets executed automatically. In the newly opened interface, select the file types that you want to recover and click on “Next”.

Step5: You can select the “Drives” on which you want the software to run and execute the recovery process. Next is to click on the “Scan” button.

Step6: Based on drive you select for scanning, the restore process begins. The whole process may take time depending on the volume of the selected drive and number of files. Once the process gets completed, a data explorer appears on the screen with preview of that data that is to be recovered. Select the files that you want to restore.

Step7. Next is to locate the location where you want to saver the recovered files.